ALL-on-ONE
DIGITAL DENTUREOpen

All-on-4 Digital Denture Decoded

Every step can introduce error. To reduce mistakes, walk the complete workflow yourself first.

A one-day clinical digital-workflow course led by full-arch prosthodontist Dr. Lin Cheng-Chung. From iTero Lumina intraoral scanning and PIC dental photogrammetry to exocad data integration and SprintRay nesting, printing and post-processing, you work through the complete All-on-4 digital denture workflow on real clinical data and models. One Taipei session only in December 2026, limited to 8 seats.

  • One-day advanced hands-on

    09:00–17:00, check-in from 08:30

  • Hands-on across four systems

    iTero Lumina × PIC, exocad × SprintRay, rotating in small groups

  • Invisalign Taiwan Office

    10F-2, No. 1, Songgao Rd., Xinyi Dist., Taipei

  • Limited to 8 seats

    Dentists with All-on-4 experience only; case-based admission review

SESSIONS

Sessions

Open

December 2026 · Taipei

Dec 13, 2026

Invisalign Taiwan Office

Register now

WHY THIS COURSE

Not another walkthrough. Know where the error comes from.

This course does not spend the day on software tours. It focuses on what the dentist actually has to master: scanning technique, the data that matters, the hand-off to the lab, and how to recognise misfit before the final prosthesis is made.

  1. 01

    A scan is not usable data

    Scan path, soft tissue, occlusion and the provisional's contours all affect downstream integration. You learn exactly how to scan, and why.

  2. 02

    Systems do not connect themselves

    From iTero and PIC into exocad, you need to understand how data is aligned, how to pick the Scan Body library, and the key layers of digital cross mounting.

  3. 03

    Problems start before printing

    Design, nesting, printing and post-processing each add error. Doing it once yourself lets you inspect, communicate and correct in the same language as your technician.

FROM CLINIC TO LAB

Four systems, one clinical workflow.

Working from Dr. Lin Cheng-Chung's real clinical data and hands-on models, you go from data capture all the way to a Prototype. The point is not to memorise buttons but to understand what each piece of software hands over, and what to check.

  1. 01 · CAPTURE

    iTero Lumina

    Intraoral scan and bite data · provisional to final

  2. 02 · POSITION

    PIC dental

    Extraoral photogrammetry · implant positions

  3. 03 · DESIGN

    exocad

    Scan Body library · data integration · basic tooth set-up

  4. 04 · PRINT

    SprintRay

    Nesting · printing · post-processing

SCAN BODY LIBRARY

From geometry to library selection

Using real digital component models, see how Scan Body geometry, implant prosthetic components and the exocad library correspond to one another.

  • digital cross mounting
  • Scan Body systems
  • Prototype
  • Alumina Bar
  • misfit verification

LEARNING OUTCOMES

What you take home is judgement.

Build a complete map of the digital workflow in one day. Limited to dentists with All-on-4 experience; groups rotate by available equipment, and the depth of model work adapts to the group.

  • 01

    Know how to scan and preserve the provisional's contours, occlusion and soft-tissue data.

  • 02

    Understand how PIC and intraoral scan data link to implant positions.

  • 03

    Choose the Scan Body library in exocad, then verify and correct the digital cross mounting.

  • 04

    Know how to divide work with the lab, check for misfit, and avoid common clinical failure points.

ADMISSION REVIEW

Admission by case review

Before admission you provide photos of at least one All-on-4 case you took part in. The course team confirms hands-on experience, and only then is your registration final.

Remove patient names, chart numbers, birth dates and any other identifying details before sending.

FEATURE

Course features

01

Intraoral scan × PIC

  • iTero Lumina scanning and bite capture
  • PIC dental extraoral photogrammetry
  • Real clinical logic on models, rotating in groups
02

exocad × SprintRay

  • Scan Body library selection and data integration
  • Design, nesting, printing and post-processing
  • PoLo and Apollo SmartFlag Scan Bodies are used in class
03

Technician demo and Prototype try-in

  • Chen Rui-Qian, CDT, demonstrates Prototype and Alumina Bar
  • Prototype try-in: occlusion, contours, vertical dimension, esthetics
  • Alumina Bar Verification of PIC accuracy; take your printed Prototype home

SUITABLE

Who this course is for

  • 01

    Dentists with All-on-4 experience who want a complete digital workflow map in one day

  • 02

    Dentists who already scan but want their data to connect properly to PIC, exocad and the lab

  • 03

    Dentists who want to know where error comes from and catch misfit before the final prosthesis

  • 04

    ALL-on-ONE alumni extending their prosthetic workflow into digital dentures

SCHEDULE

Schedule

08:30
~
09:00
Check-in
09:00
~
10:30
Introduction to the All-on-4 digital denture workflow — scanning, Scan Bodies, lab hand-off, common errors and misfit risk; PIC photogrammetry demo and key pointsDr. Lin Cheng-Chung
10:30
~
10:45
Coffee break
10:45
~
11:15
Demo: from provisional scan to final prosthesis — digital cross mounting, occlusion, contours, soft tissue, linking PIC data to implant positionsDr. Lin Cheng-Chung
11:15
~
12:00
iTero Lumina × PIC hands-on — intraoral scanning and extraoral photogrammetry, rotating in groups by available equipmentDr. Lin Cheng-Chung
12:00
~
13:00
Lunch
13:00
~
13:40
Technician demo — data integration, basic tooth set-up, Prototype, Alumina Bar and SprintRay nestingChen Rui-Qian, CDT (Chuang Yi Dental Lab)
13:40
~
15:00
exocad × SprintRay hands-on — Scan Body library, data integration, design and nestingDr. Lin Cheng-Chung
15:00
~
16:00
Printing, tea and post-processing — observe the print, learn post-processing, share clinical experienceDr. Lin Cheng-Chung
16:00
~
17:00
Prototype try-in and discussion — occlusion, contours, vertical dimension and esthetics; verify PIC accuracy with Alumina Bar Verification, troubleshoot errors, and review the key checks before the final prosthesisDr. Lin Cheng-Chung

INSTRUCTORS

Instructors

Dr. Lin Cheng-Chung

Prosthodontics & Digital Design

Dr. Lin Cheng-Chung

Full-arch prosthodontic specialist

  • D.D.S., Taipei Medical University
  • Board-certified Implantologist, Chinese Academy of Esthetic Implant Dentistry
  • Prosthodontic residency, Chi Mei Medical Center, Tainan
  • Member, Academy of Prosthetic Dentistry, R.O.C.
  • Director, Asia-Pacific Academy of Clinical Dentistry
  • Former dentist, Department of Dentistry, Chi Mei Medical Center
  • Dedicated All-on-4 prosthodontist, Leaderway Oral & Maxillofacial Surgery Dental Clinic

PRICING

Pricing

Recommended

NEW

General

Dentists with All-on-4 clinical experience; case-based admission review

NT$ 55,000Early birduntil Nov 16, 2026

NT$ 50,000 / person

  • One-day advanced hands-on, 09:00–17:00
  • Digital workflow demos and provisional-to-final demo
  • Hands-on model work with iTero Lumina × PIC and exocad × SprintRay
  • Your printed Prototype to take home
  • Technician demo: Prototype and Alumina Bar

ALUMNI

ALL-on-ONE alumni

Attended ALL-on-ONE Part I; eligibility is verified

NT$ 55,000Alumni priceuntil Nov 16, 2026

NT$ 50,000 / person

  • One-day advanced hands-on, 09:00–17:00
  • Digital workflow demos and provisional-to-final demo
  • Hands-on model work with iTero Lumina × PIC and exocad × SprintRay
  • Your printed Prototype to take home
  • Technician demo: Prototype and Alumina Bar

NOTES

Important notes

Important notes
  • Limited to dentists with All-on-4 clinical experience; admission is reviewed in advance. One Taipei session only at the end of 2026, limited to 8 seats.
  • After registering online, send pre- and post-operative X-rays of one case you treated, with a short note on your role, via the course LINE account. Intraoral and prosthetic photos are welcome.
  • Remove patient names, chart numbers, birth dates and any other identifying details first; records are used only for admission review.
  • ALL-on-ONE alumni: please state the year and spring/fall session you attended. Eligibility is verified; the alumni price is not combined with early bird.
  • Once approved and a seat is confirmed, the team sends a payment notice. Please pay within 3 days; otherwise the seat may be released to the waiting list.
  • Registration is final only when the organiser issues a registration confirmation after verifying payment.
  • The course includes digital workflow demos, a provisional-to-final demo, hands-on model work and a printed Prototype to take home; equipment is used in rotating groups.
  • Please prepare the laptop, software and equipment listed in the pre-course notice. The depth of model work and demos may be adjusted to the group's level and pace.
  • Bring photo ID at check-in for identity verification.
  • Course materials and cases are for personal study only; no audio or video recording or public sharing without permission.
Refunds & transfers
  • Calculated from the course date, based on the day the cancellation request is received on the official course LINE account
  • Cancel 60+ days before the course: full refund
  • Cancel 30–59 days before: 70% refund
  • Cancel 14–29 days before: 50% refund
  • Less than 14 days before, or no-show: no refund as a rule
  • You may transfer your seat once at least 7 days before the course; the transferee must qualify and pass review, and the transfer is complete only after the organiser confirms. If the transferee is not eligible for your discount, the price difference is payable
  • If the organiser cancels the course, fees are refunded in full; if postponed, you may keep your seat or request a full refund
  • Where these terms differ from applicable law, the law prevails

FAQ

Frequently asked questions

How does the admission review work?

The course is limited to dentists with All-on-4 clinical experience and admission is reviewed in advance. After registering online, send pre- and post-operative X-rays of one case you treated, with a short note on your role, via the course LINE account (intraoral and prosthetic photos welcome). Remove patient names, chart numbers, birth dates and any other identifying details first. Once approved and a seat is confirmed, the team sends payment instructions.

What does it cost, and is there an alumni price?

Regular price NT$55,000. Early bird NT$50,000 for registrations before 16 Nov 2026, and ALL-on-ONE alumni price NT$50,000 (not combined with early bird). Alumni please note the year and spring/fall session you attended; eligibility is verified. The fee covers the digital workflow demos, the provisional-to-final demo, hands-on model work and your printed Prototype to take home.

Do I need to bring equipment?

Please prepare the laptop, software and related equipment listed in the pre-course notice. iTero Lumina, PIC dental and SprintRay are provided on site and used in rotating groups; the depth of model work and demos may be adjusted to the group's level and pace.

What if the course is full, or I cannot attend?

There is only one session, in Taipei, limited to 8 seats. After approval, please pay within 3 days of the payment notice or the seat may be released to the waiting list. If you cannot attend, you may transfer your seat once at least 7 days before the course; the transferee must also qualify and pass review. Refunds depend on how far before the course you cancel; see the registration terms.

Digital Denture|All-on-4 Digital Denture Decoded

Register now

Digital Denture|General

NT$ 50,000 / person

Register now